Laundry and garage cabinets are the same job in two very different rooms. A laundry room is inside the house, dry and cool, and any good box lives there. A Tampa garage is hot and damp for most of the year. Half the cabinets sold for it swell inside a year. Done right you get a laundry you can fold in and a garage you can park in. Done wrong you get doors that will not close by next summer. The difference is decided when the box is chosen.
Priced by written scope, never by the hour.
Cabinet pages show white uppers over a washer. None of them tells you that a garage is a different climate from the room next to it. Here is what changes between the two.
It is cooled, it is dry, and any cabinet that works in a kitchen works here. Uppers over the machines, a tall cabinet for the broom and the ironing board. A base with a counter to fold on. The only trap is the dryer vent, and we map it first.
No air conditioning, a slab that sweats, ninety degrees in the shade. Particleboard swells and sags. The boxes that last are plywood with a sealed finish, or metal. We tell you which ones will make it and which ones will not, before you buy.
The dryer vent runs from the machine to the outside, and an upper in its path pinches it. The washer box has the valves and the drain at a set height. Cabinets go around both, not over them. We map the wall before we size a box.
Many Tampa garages have the water heater and a floor drain along the wall you want cabinets on. The heater needs clearance to work on it. The drain needs to stay open. The run is planned around both.
Two laundry rooms the same size can price far apart. Here is what actually moves the number on laundry and garage cabinets.
Uppers alone over the machines is the small job. Uppers, a tall cabinet and a base run with a counter is the full one. Count the feet of each. That is most of the price, before the room adds anything.
A utility sink in the base run means a plumber and a drain. In a laundry the drain is usually close. In a garage it may not exist. A sink is the one line that can double a small job.
In the laundry a stock box is fine and cheap. In the garage a box that survives costs more per foot, and there is no cheap version that lasts. We say which one and why, so the number is honest.
Laundry walls are drywall on studs. Garage walls are often bare block, and anchoring into block is a different fastener and more time. A wall that was never finished behind old shelves gets patched first, as its own line.
The price is written before the work starts. These are the things that get settled first, because they are what make the number hold.
We measure the wall and find the studs or check the block. We map the dryer vent, the washer box, the outlets and any drain. In a garage we look at the heater, the panel and the slab. It takes an hour.
Stock for the laundry, plywood or metal for the garage. Sizes on paper, uppers and bases, the counter if there is one. What is not in the drawing is not in the job.
A utility sink means the licensed plumber is in the scope with their own line. If there is no sink, there is no plumber, and the scope says so.
Old shelves out, wall repair, the boxes, the leveling, the counter, the trim and the hardware. What is in, what is not. The not in list is the honest part.
One number for the written scope. Payments are tied to stages you can see. Signing, boxes delivered, boxes set, final walkthrough. You pay for what exists on the wall.
Every laundry and garage cabinet scope on this site says where it stops. These are the boundaries we put in writing before anyone starts.
Uppers over the machines is one day. A full laundry run with a counter is two or three. A garage wall of cabinets is two or three as well, and the block wall is what adds the time. The machines are back in place the day we finish. Your scope has the dates.
Laundry and garage cabinets are sold as easy. Usually they are. Sometimes the room makes them a bad idea, and nobody says so until the doors will not close. Here is where we say no, and why.
Particleboard in a Tampa garage swells inside a year. We will not hang it and warranty it. We show you a plywood or a metal box that will last. If that is out of budget, we say so and stop.
A crushed vent is a fire risk and a dryer that never finishes. If the only place for an upper is over the vent, we reroute the vent first, as its own line. Or the upper does not go there.
A garage wall that shows a water line, or a laundry wall soft behind the machines, gets fixed first. Then the box goes on. A cabinet over a wet wall hides the problem and rots from behind.
A base cabinet is 24 inches deep. Two walls of them in a single garage leave no room for the door to open. We measure the car before the run, and we tell you when the math does not work.
If the work we did fails, we come back and fix it. That holds for as long as you own the home. On laundry and garage cabinets it covers what we set and finished. The boxes staying level and anchored, the counter, the trim and the hardware.
A warranty is only worth what its exclusions say. Ours are above, in the same size type as the promise. Ask whoever you are talking to how long theirs runs, and get the number in writing.
Plywood boxes with a sealed finish, or metal. Not particleboard, and not the cheap laundry uppers from a big store. The room is hot and damp eight months a year, and a box that is not built for it swells. We tell you which ones will make it before you buy.
Yes, if the machines are front loaders. The counter sits on the bases or on cleats at the wall, and the machines slide under. Top loaders need the lid, so the counter goes beside them, not over. We measure both before the drawing.
Cabinets alone, no. If a utility sink adds a drain, or an outlet moves, that part is the licensed trade's work. That trade pulls its own permit. It is named in your scope with the fee as its own line, at cost.
Yes, if the scope says so. We pull them, do the work, and put them back the same day. If the dryer is gas, the licensed plumber disconnects and reconnects it, and that is their line. We do not touch a gas connection.
Yes, with the clearance the heater needs to be worked on. The scope leaves that space open and says why. Boxing in a heater is the one thing the next plumber will curse you for.
Only a change you ask for, or hidden damage we could not see. A change is priced in writing before it happens. Hidden damage is priced only after it is visible. Nothing else moves the number.
Hillsborough, Pinellas, Pasco, Manatee and Sarasota counties. If your town is not on this list, call and ask: the answer is often yes.
Never hourly, never a verbal figure, and our workmanship carries a lifetime warranty. Hillsborough, Pinellas, Pasco, Manatee and Sarasota counties.